OHC2016
Registration is now closed. Open Hardware Miniconf 2016 REGISTRATION FORM
The Open Hardware Miniconf 2016 will take place as part of LCA 2016 in Geelong, Victoria, Australia.
The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and "maker culture". One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.
Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.
The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day.
Unlike previous years, due to venue restrictions, the assembly will not require any soldering. However, we aim to bring soldering back in 2017.
Contents
Venue
D2.211 (flat floor classroom)
Final schedule
If you are attending the assembly workshop, please be on-time ... we need to get underway promptly.
- 10:40 - 12:20 Assembly workshop (registration required to participate, spectators also welcome)
- 12:20 - 1:20 Lunch
- 1:20 - 2:10 Assembly workshop continued
- 2:10 - 2:20 Break
- 2:20 - 2:40 Talk 1: Jon Oxer: Pick and Place machine (live demonstration)
- 2:40 - 3:00 Talk 2: ESP8266 ESPlant (Wi-Fi garden sensors) design and operation
- 3:00 - 3:40 Afternoon Tea
- 3:40 - 4:00 Talk 3: Josh Stewart: Open source car engine management
- 4:00 - 4:20 Talk 4: Alistair D'Silva: LinuxCNC for fun and profit (now with deadly lasers)
- 4:20 - 4:30 Break
- 4:30 - 4:50 Talk 5: Sebastian Holzapfel: Hardware projects using eChronos & lwIP: toward high-assurance IoT
- 4:50 - 5:10 Talk 6: Peter Hardy: Kerbal Space Program simulator hardware controller and display
- 5:10 - 5:40 Lightning talks, project showcase, general discussion
Lightning Talks
- If you'd like to present a 5 minute lightning talk, please email andyg@geekscape.org
Call For Papers
Call For Papers is now closed. Please see OHC2016-CFP for more information
Accepted Papers
Josh Stewart: Open source car engine management
Open source car engine management project (hardware and software). Covering hardware design experiences and a project update.
Alistair D'Silva: LinuxCNC for fun and profit (now with deadly lasers)
This talk will cover the basics of converting a Cartesian robot to LinuxCNC, and some of the pitfalls (and fire traps !) encountered.
Sebastian Holzapfel: Hardware projects using eChronos & lwIP: toward high-assurance IoT
What eChronos & lwIP (both open-source) are; why they should be considered for embedded projects (including a brief tutorial-like demonstration of the RTOS & TCP/IP stack), porting lwIP to this RTOS and porting the RTOS to this hardware platform (TI Connected Launchpad). The second half will be a few hardware demos on the platform:
- An IoT light controller that makes everyone in the office annoyed if builds fail.
- A telnet-controlled echo server that makes it easy to test wierd hardware devices before they can connect to the internet.
- An HTTP server that responds to sensor inputs by displaying them on a webpage.
Peter Hardy: Kerbal Space Program simulator hardware controller and display
The talk I'd like to give is a presentation of a fairly large project I've been working on. I've built a custom hardware controller and display interface for a proprietary spaceflight simulator, Kerbal Space Program. It's a pretty big project involving two arduino microcontrollers, and all sorts of input and output devices. There's a full picture gallery of my build at http://imgur.com/a/o2yh0.
Discussion Group
There is a Google Group email list for discussion of topics related to the miniconf, including the SimpleBot assembly session:
https://groups.google.com/forum/#!forum/open-hardware-conf
Assembly Project
Each year we build a project developed for the Miniconf, and this year we'll be assembling ESPlant garden sensor designed by Angus Gratton and John Spencer.