Difference between revisions of "Main Page"

Latest revision as of 10:09, 26 May 2022

Update 2022-09-26: For LCA2022, the OHMC team is completing the hardware delivery for OHMC2022. This is well overdue ... however we are making progress and will provide project status updates.

For more details, see the OHMC2022 page ... and project announcement.

Throughout the rest of 2022, this project will be developed in the open: encouraging collaboration and contributions by the LCA2022 attendees.

The Open Hardware MiniConf is an event that runs as a specialist stream within the linux.conf.au conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own electronic project, and then the afternoon is filled with interesting talks about various projects and techniques related to the morning project and to open hardware in general.

The Open Hardware MiniConf began as the Arduino MiniConf in Wellington NZ in 2010 and has run every year since. Although Arduino is still a powerful and popular tool for learning about microcontroller development, the event has now grown in scope to cover broader Open Hardware topics including non-Arduino projects. In 2015, it took on its new identity as the Open Hardware MiniConf to reflect this broader interest.

To give you some idea what to expect, this is the hardware assembly session at the LCA2017 Open Hardware MiniConf:

And before that the LCA2016 Open Hardware MiniConf:

(Photo by Andy Gelme, CC2.0)

After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!

Note: To attend you must first register for the main conference, which provides the venue. The Open Hardware MiniConf is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See linux.conf.au for more information.

Registration And Cost

As there is always a hardware build as part of the Open Hardware MiniConf, there is a registration form that needs to be completed, and additional cost for the kit.

As the OHMC is a linux.conf.au miniconference, attendance is free for linux.conf.au delegates, but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit. Space is limited so get in fast!

If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form.

See Open Hardware MiniConf 2021 for more information.

(Photo by Andy Gelme, CC2.0)

@@ Line 1: / Line 1: @@
-== Arduino Miniconf 2013 ==
+{{DISPLAYTITLE:Open Hardware MiniConf}}
-=== What ===
+'''Update 2022-09-26: For [https://lca2022.linux.org.au LCA2022], the OHMC team is completing the hardware delivery for [[OHMC2022|OHMC2022]].  This is well overdue ... however we are making progress and will [[OHMC2022_Project_Status|provide project status updates]].'''
-The Arduino Miniconf is a 1-day event that runs in conjunction with the [http://linux.conf.au/ linux.conf.au] conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own Arduino-compatible project, and then the afternoon is filled with interesting talks about various projects and techniques related to Arduino and open hardware in general. To give you some idea what to expect, this is the hardware assembly session at the 2011 Arduino Miniconf:
-[[File:amc-2011.jpg]]
+For more details, see [[OHMC2022|the OHMC2022 page]] ... and [[OHMC2022_Announcement|project announcement]].
-(Photo by [http://www.flickr.com/photos/karora/5383488664/ Andrew McMillan], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])
+Throughout the rest of 2022, this project will be developed in the open: encouraging collaboration and contributions by the LCA2022 attendees.
-After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!
+----
-=== When ===
+The [[OHMC2021|Open Hardware MiniConf]] is an event that runs as a specialist stream within the [http://linux.conf.au/ linux.conf.au] conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own electronic project, and then the afternoon is filled with interesting talks about various projects and techniques related to the morning project and to open hardware in general.
-Monday, January 28th, 2013, promptly after the LCA opening ceremony and morning tea. Please don't be late!
-=== Where ===
+The [[OHMC2021|Open Hardware MiniConf]] began as the Arduino MiniConf in Wellington NZ in 2010 and has run every year since. Although Arduino is still a powerful and popular tool for learning about microcontroller development, the event has now grown in scope to cover broader Open Hardware topics including non-Arduino projects. In 2015, it took on its new identity as the Open Hardware MiniConf to reflect this broader interest.
-Canberra, as part of [http://linux.conf.au/ linux.conf.au]. Note that to attend you must first register for the main conference, which provides the venue. The Arduino Miniconf is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See [https://lca2013.linux.org.au/wiki/Miniconfs/Arduino https://lca2013.linux.org.au/wiki/Miniconfs/Arduino] for more information.
-=== Registration And Cost ===
+To give you some idea what to expect, this is the hardware assembly session at the LCA2017 Open Hardware MiniConf:
-Attendance is free (to linux.conf.au delegates) but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit for $110. Space is limited so get in fast! If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form:
-'''[https://docs.google.com/a/oxer.com.au/spreadsheet/viewform?formkey=dE91Zkc3LV9kQnJIYzdsWGUxaFU2d1E6MA#gid=0 Register here]'''
+[[File:OHMC2017a.jpg]]
-== Schedule ==
+And before that the LCA2016 Open Hardware MiniConf:
-(Schedule still to come)
+[[File:OHMC2016a.jpg]]
-<!-- [[File:amc-schedule-v1.png]] -->
+(Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])
-== Hardware Assembly Project: HackCNC (basic X/Y mill/plotter) ==
+After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!
-The hardware assembly project this year is something very special: not just assembling a PCB, it's a whole mechatronic box of magic. You'll get to assemble the electronics, stepper motors, a servo, a pre-cut timber chassis, and have access to the design files and (of course!) all the source code for the firmware to drive it. Meet HackCNC, the Open Hardware X/Y platform:
-[[File:DSCF2853.JPG|480px]]
-[[File:HackCNC-render.jpg|480px]]
-(A Render of an early prototype)
-The chassis, called "[https://github.com/CCHS-Melbourne/HackCNC HackCNC]", was designed by John Spencer as an easy-to-assemble X/Y platform. It uses threaded rod and two stepper motors to move a toolhead in X and Y axes, and has a servo motor to allow something light such as a marker pen to be moved up and down in the Z axis. The base is large enough to comfortably fit an A4 sheet of paper. The chassis itself has been cut from MDF using a CNC machine, and prepared so that you can clip it together in minutes. It can also be disassembled for easy packing for you to take it home afterwards. The chassis also uses plastic brackets and clips that have been printed on a 3D printer, and all the design files for those are available as well.
-Features:
-* Threaded rod X/Y drive mechanism.
-* Simple assembly with minimal tools.
-* All plastic parts can be produced using a 3D printer such as a RepRap or Makerbot.
-* Uses commonly available hardware such as threaded rods and bearings.
-HackCNC is intended to be a starting point: it gives you the basic structure of an X/Y platform that you can then adapt to your own projects. We'd love to see what people come up with!
-The matching control board, called "CNCPlot", was designed by [https://github.com/lukeweston Luke Weston] and produced by [http://www.freetronics.com/ Freetronics] specially for the Arduino Miniconf:
-[[File:DSCF2860.JPG|480px]]
-Features:
-* Arduino Leonardo compatible
-* Two onboard stepper motor drivers
-* One onboard servo driver
-* 20x4 LCD
-* microSD card slot
-* Breakout connector for Nintendo DS touchscreen (not included)
-The CNCPlot board was designed specifically to drive the HackCNC chassis, but it's also an extremely flexible general purpose board that would be brilliant for other projects involving stepper motors.
-The CNCPlot board uses many surface-mount parts, so those have all been pre-fitted. You will only need to fit standard "through-hole" parts, so the soldering skill required is minimal. This project is therefore suitable for a beginner, even though the end result will be a very capable board. It may look scary and complicated, but don't worry, most of the parts will already be on the board.
-<!-- [[File:CNCPLOT-main.png|480]] -->
-<!-- [[File:Pebble-main.png|480px]]
-[[File:Pebble-lcd.jpg|480px]] -->
-The complete HackCNC kit will be $110, which includes everything required: parts for the mechanical chassis, the CNCPlot controller, the display, power supply, steppers, servo, even a USB cable.
+Note: To attend you must first register for the main conference, which provides the venue. The  [[OHMC2021|Open Hardware MiniConf]] is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See [http://linux.conf.au/ linux.conf.au] for more information.
-<!-- [http://www.arduinominiconf.org/index.php/Pebble_V2.0_Instructions Assembly instructions] -->
+== Registration And Cost ==
+As there is always a hardware build as part of the Open Hardware MiniConf, there is a registration form that needs to be completed, and additional cost for the kit.
-Joshua Mesilane has some videos of getting the hackCNC running in OSX that give a good overview of it working.
+As the OHMC is a linux.conf.au miniconference, attendance is free for linux.conf.au delegates, but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit. Space is limited so get in fast!
-[https://www.youtube.com/watch?v=OycKx8cXTkk HackCNC running under OSX (sortof) part 1]
+If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form.
-[https://www.youtube.com/watch?v=Wm2X384tGXg HackCNC running under OSX (sortof) part 2]
+See [[OHMC2021|Open Hardware MiniConf 2021]] for more information.
-Get the assembly instructions at [[HackCNC Assembly Tips]]
+[[File:OHMC2016b.jpg|320px]]
-== Previous Arduino Miniconfs ==
+(Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])
-For historical reference:
+== Previous Events ==
-* [[AMC2012|Arduino Miniconf 2012]] (Ballarat, AU)
+* [[OHMC2022|Open Hardware MiniConf 2022 - SwagBadge + SAO:FPGA (Online)]]
-* Arduino Miniconf 2011 (Brisbane, AU)
+* [[OHMC2021|Open Hardware MiniConf 2021 - SwagBadge (Online)]]
-* Arduino Miniconf 2010 (Wellington, NZ)
+* [[OHMC2020|Open Hardware MiniConf 2020 - DingoCar (Gold Coast, Australia)]]
+* [[OHMC2019|Open Hardware MiniConf 2019 - DonkeyCar (Christchurch, New Zealand)]]
+* [[OHMC2018|Open Hardware MiniConf 2018 - LoliBot (Sydney, Australia)]]
+* [[OHC2017|Open Hardware MiniConf 2017 - IoTuz (Hobart, Australia)]]
+* [[OHC2016|Open Hardware MiniConf 2016 - ESPlant (Geelong, Australia)]]
+* [[OHC2015|Open Hardware MiniConf 2015 - SimpleBot (Auckland, New Zealand)]]
+* [[AMC2014|Arduino MiniConf 2014 - ArduPhone (Perth, Australia)]]
+* [[AMC2013|Arduino MiniConf 2013 - HackCNC (Canberra, Australia)]]
+* [[AMC2012|Arduino MiniConf 2012 - Pebble V2 + KitTen (Ballarat, Australia)]]
+* [[AMC2011|Arduino MiniConf 2011 - MobSenDat (Brisbane, Australia)]]
+* [[AMC2010|Arduino MiniConf 2010 - Pebble V1 (Wellington, New Zealand)]]

Difference between revisions of "Main Page"

Latest revision as of 10:09, 26 May 2022

Registration And Cost

Previous Events

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools